The above error occurs when you remove your external USB drive without using the Safely Remove Option which results in the USB drive Partition Table to become corrupted and unreadable. To avoid losing your data or corrupting the storage drive’s partition table always make sure that you use the safely remove option before unplugging your drive. And in case you receive a warning message ‘This device is currently in use. Close any programs or windows that might be using the device and then try again’, then restart your computer.

Fix You need to format the disk in drive before you can use it

Method 1: Using Check Disk Utility

  1. Note the driver letter in the error, for example, “You need to format the disk in drive H: in drive before you can use it.” In this example the drive letter is H.

Fix You need to format the disk in drive before you can use it Method 1: Using Check Disk Utility Method 2: Use TestDisk utility Write Partition Structure back to disk.

  1. Right click on the Windows button (Start Menu) and select “Command Prompt(Admin).”

  2. Type the command in cmd: chkdsk (driveletter:) /r (Change drive letter with your own). Example: The drive letter is our example is “H:” hence the command should be chkdsk H: /r

  3. If you are asked to recover files select Yes.

  4. If the above command doesn’t work try: chkdsk (driveletter:) /f In many cases, the windows check disk utility seems to fix You need to format the disk in drive before you can use it error but if it didn’t work don’t worry just continue to the next method.

Method 2: Use TestDisk utility

  1. Download TestDisk utility to your computer from here: http://www.cgsecurity.org/wiki/TestDisk_Download

  2. Extract the TestDisk utility from the downloaded file.

  3. Now in the extracted folder double click on “testdisk_win.exe” to open the TestDisk utility.

  4. At the TestDisk utility first screen, Select Create then press Enter.

  5. Wait until TestDisk scans your computer for connected disks.

  6. Carefully select the unrecognized external USB hard drive like WD Ultra and press Enter to Proceed to disk analysis.

  7. Now select the partition table type and press Enter.

  8. Select Analyze option and press Enter to let TestDisk utility to analyze your hard disk drive and find the lost partition table structure.

  9. Now TestDisk should display the current partition structure. Select Quick Search and press Enter.

  10. If TestDisk locates the lost partition’s then press “P” to ensure that your files are in this partition.

  11. At this point two different things can happen:

  12. If you can see a list of your lost files on your screen then press “Q” to return to the previous menu and continue to “Write Partition Structure back to disk.”

  13. If you don’t see your files or the files are damaged, then you need to perform a Deeper search:

  14. Press “Q” to quit and return to the previous screen.

  15. At the previous screen, press Enter.

  16. Press Enter one more time to perform a Deeper Search.

  17. Let TestDisk analyzes your disk as this operation may take some time.

  18. After the Deeper search is completed, again press “P” to see if your files are listed.

  19. If your files are listed, then press “Q” to return to the previous menu and then continue to the next step.

Write Partition Structure back to disk.

  1. After successful recognition of your files, press Enter again to restore the files.

  2. Finally, select the Write option and press Enter to write the found partition data to the hard disk’s MBR (Master Boot Record).

  3. Press “Y” when asked to confirm your decision.

  4. After that quit TestDisk utility by pressing “Q” and then restart your PC.

  5. If during Startup, Windows Disk check utility shows up DO NOT INTERRUPT. You may also like:

Fix You require permission from SYSTEM to make changes to this folder How to fix Wireless capability is turned off (Radio is off) Fix Folder in use The action can’t be completed Error How to fix Yes button grayed out in User Account Control

That’s it if you have followed the above procedure correctly then the error message  “You need to format the disk in drive before you can use it” is fixed and you should see your hard disk content again. If you still have any questions regarding this post feel free to ask them in the comment section.

Fix You need to format the disk in drive before you can use it - 59Fix You need to format the disk in drive before you can use it - 29Fix You need to format the disk in drive before you can use it - 47Fix You need to format the disk in drive before you can use it - 41Fix You need to format the disk in drive before you can use it - 65Fix You need to format the disk in drive before you can use it - 4Fix You need to format the disk in drive before you can use it - 9Fix You need to format the disk in drive before you can use it - 46Fix You need to format the disk in drive before you can use it - 68Fix You need to format the disk in drive before you can use it - 54Fix You need to format the disk in drive before you can use it - 63Fix You need to format the disk in drive before you can use it - 49Fix You need to format the disk in drive before you can use it - 21Fix You need to format the disk in drive before you can use it - 73Fix You need to format the disk in drive before you can use it - 80Fix You need to format the disk in drive before you can use it - 69Fix You need to format the disk in drive before you can use it - 61Fix You need to format the disk in drive before you can use it - 7Fix You need to format the disk in drive before you can use it - 88Fix You need to format the disk in drive before you can use it - 40Fix You need to format the disk in drive before you can use it - 66Fix You need to format the disk in drive before you can use it - 72